RAMMING/GUNNING SPRAY MASSES
|
|
|
| Product | MgO % | SiO2 % | Fe2O3 % | Setting Type | Grading (mm) | Sintering Temp. (oC) | Appli. Temp. (oC) | Application Area |
| CC-BRM-95 | 94 | 1.50 | - | Chemical | 0-5 | 1550 | 1750 | Tap Hole of BOF |
| CC-BRM-85 | 85 | 5.00 | 6.00 | Ceramic | 0-8 | 1400 | 1750 | Dry RAmming Mass for EAF Bottom |
| CC-EBT-45 | 45 | - | - | - | 2-6 | - | 1750 | EBT-EAF Tap Hole Filling Mass |
| CC-WRM-84 | 83 | 8.50 | - | Chemical | 0-5 | 1550 | 1750 | Wet Ramming Mass for EAF |
| CC-BRM-70 | 70 | 8.00 Cr2O3 |
- | Chemical | 0-5 | 800 | 1750 | Dry Ramming Mass for Induction Furnace Melting mild steel & alloy steel |
| Product | SiO2 % | Fe2O3 % | Al2O3 % | Setting | Grading (mm) | PCE (SK) | Sintering Temp. (oC) | Appli. Temp. (oC) | Application Area |
| CC-SRM | 98 | 0.3 | - | Ceramic | 0-5 | 32 | 1200 | 1700 | Lining Coreless Induction Furnace |
| CC-SRM | 98 | 0.2 | 0.9 | Ceramic | 0-5 | 32 | 1200 | 1700 | Lining Coreless Induction Furnace |
Grading : 95% min. will pass through the maximum grain size indicated.
| Product | MgO % | SiO2 % | Setting | Grading (mm) |
PCE (SK) |
After drying at 110oC | Appli. Temp. (oC) | ||
| B.D (gm/cc) Min | CCS (kg/cm2) Min | PLC (%) Max | CCS (kg/cm2) Min | ||||||
| CC-GUN-1 | 80 | 9.0 | Chemical | 0-3 | 38 | - | - | -2.0 | 200 |
| CC-GUN | 85 | 8.0 | Chemical | 0-3 | 38 | 2.70 | 350 | -1.5 | 300 |
| CC-GUN-SUPER | 90 | 4.0 | Chemical | 0-3 | 38 | 2.75 | 350 | -1.5 | 200 |
| CC-GUN-SUPER-SPL | 94 | 2.0 | Chemical | 0-3 | 38 | 2.80 | 400 | -1.5 | 200 |
| Product | MgO % | SiO2 % | Fe2O3 % | Setting Type | Grading (mm) | Sintering Temp. (oC) | Appli. Temp. (oC) | PLC (%) | B.D (gm/cc) | Application Area |
| CC-SM/87-70 | 66 | 25 | 5.5 | Chemical | 0-0.5 | 750 | 1600 | -3.0 | 1.80 | Spraying of Bottom and walls of tundish |
| CC-SM/87-80 | 78 | 14 | 5.0 | Chemical | 0-0.5 | 750 | 1650 | -5.0 | 1.85 | Spraying of Bottom and walls of tundish |
| CC-SM/87-90 | 85 | 7 | 3.0 | Chemical | 0-0.5 | 750 | 1650 | -5.0 | 1.85 | Spraying of Bottom and walls of tundish |
| CC-SM/80 | 78 | 14 | 5.0 | Chemical | 0-1 | 750 | 1650 | -1.5 | 2.30 | Dry vibratable mix for bottom and wall of tundish |
Grading : 95% min. will pass through the maximum grain size indicated.
| Properties | CC-Spray-S |
|
·
·
·
·
·
·
 Area
of Application |
65.0 1200 0-0.5 Spraying Chemical 800 Hot repair of coke oven walls |
Grading : 95% min. will pass through the maximum grain size indicated.
